Skip to content
Publishing · 8 min read

How to turn your children’s book character into a 3D-printed figurine

Short answer

A clean, full-body picture of your character is enough. An image-to-3D service turns it into a one-piece model, a workshop prints it, and it arrives in 1 to 3 weeks. Budget about $28–64 for a 12 cm figurine in one color, several times more in full color. It is a display piece, not a certified toy.

Key numbers

  • Design on objekto: 1,900 credits for a one-piece figurine, what a new account gets free
  • 12 cm in one color (PETG), delivered: $28–34 estimated; one real design quoted from $63.90
  • 12 cm in resin: $101–157; in full color: $257–548 (objekto’s estimates, November 19, 2026)
  • Manufacturing and delivery: usually 1 to 3 weeks, to 35 countries
  • Toy rules go by the child’s age: 12 or younger in the US, under 14 in the EU

By kdpbook.io editorialPublished ✓ Sources read on

A figurine puts the hero of your book on your signing table, in your launch photos and on a reader’s shelf. Below: what the artwork has to show, four ways to go from a flat drawing to a printed object, real quotes, and the two things to check before you sell one: who owns the art, and when the law calls it a toy.

What picture of your character do you need?

A 3D tool reads shapes, so give it the clearest view of them you have:

  • One character, whole body. Head to feet, nothing cropped, nothing in front of it, on a plain background.
  • Front and side, as two pictures. A picture doesn’t show the back or the underside, so the tool guesses them. A second view leaves less to guess; say the rest in words (“a striped tail, a small backpack”).
  • A height. Nothing in a picture says whether the figurine is 3 cm or 30 cm tall. Give one dimension, base included: objekto suggests 8 to 25 cm (3.1 to 9.8 in) for a figurine to display.
  • Shapes thick enough to print. Whiskers, antennae, a thin scarf end or single fingers are the parts that vanish or snap. On the three materials used below, a detail under 0.3 to 0.5 mm disappears and a wall needs 0.5 to 1 mm, depending on the material: thicken what is fragile, or drop it.
  • Flat colors. A print has a shape and a color for each area, not brushwork: a watercolor wash or a pencil texture comes out as a plain surface.

A character reference sheet is that picture. If you made the book with kdpbook, each main character (up to 5 per book) already has one, drawn in three views on a plain background, in the editor’s Cast tab: crop the front view and the three-quarter view into two pictures. If you drew the book by hand, a clean sketch is enough for the shape.

How do you get from a picture to a printed figurine?

Someone has to turn the flat picture into a 3D model, check that it can be printed, and print it. Four routes, by who does that work:

RouteWhat you getFits when
A service that designs and prints (objekto)the printed figurine, from a description and a picture: designed, checked for printing and deliveredno 3D file, no printer
An AI mesh generator (Meshy, Tripo), then a print service or your own printera 3D file, from a picture or a text prompt; checking that it prints and getting it printed are up to youyou want the file, or print at home
A 3D artista model sculpted by a person from your brief and your character sheet, to your corrections; printing is a second stepa person to talk to, a product made in series
A custom plush maker (Budsies)a sewn soft toy made from a drawing, not a printsomething to hug, not to display

The first three rows follow objekto’s own comparison, six ways to get a custom object made, which also says when its service isn’t the right choice (you already have a print-ready file, you need the object in less than a week, you need a certified part). Budsies makes stuffed animals from drawings, with bulk production from 50 pieces.

A note on bias: objekto is made by the team behind kdpbook. The steps and prices below are the ones its public pages gave on November 19, 2026; the other routes are listed because they fit some projects better.

How does it work on objekto?

objekto is an online service that designs an object with AI from a description, a picture or a sketch, checks that it can be printed, has it made by a 3D-printing workshop and delivers it. For a book character:

  1. Open an account. A new account gets 1,900 credits once, with no card: the price of designing a one-piece figurine.
  2. Decide who sees the project. New projects are public by default: once the first version is ready, the design appears in objekto’s gallery and others can order a print of it. For a character you haven’t published yet, switch the project to private before you create it. Your pictures and your conversation stay private either way.
  3. Describe the figurine and add the picture. The character, the pose, the height with the base, and that it is for display. Give the color of each part, or ask for it raw, to paint yourself.
  4. Choose between two models. “One piece, true to the image”: the picture becomes a single 3D shape that follows it, in its main color or in full color. Or a stylized figurine built from simple volumes, with one color per part and a separate base if you want one (2 to 4 parts, 3,800 credits). When the shape suits both, the quote shows both, each with its credits and an estimated print price, before anything is generated.
  5. Check the 3D preview. The model is scaled to your height and checked for wall thickness, smallest detail and the largest size the material allows.
  6. Pick the material and order. PETG for the cheapest print, resin for fine detail, full color (for the model made from your picture) when it should look like the page. The firm price, delivery included, is shown before you pay. Manufacturing and delivery usually take 1 to 3 weeks.

The design itself takes a median of 7 minutes for one part. objekto’s page on custom 3D-printed figurines shows figurines already designed this way, and its guide from a photo to a 3D-printed object says what a picture gives the AI and what you have to add.

How much does a 3D-printed figurine cost?

On objekto you pay twice: the design, in credits, and the print, in dollars. Designing a one-piece figurine costs 1,900 credits: free on a new account, about $19 at the public credit price after that. The print depends on the height and the material. objekto’s estimates for a typical figurine, delivered, on November 19, 2026:

HeightPETG, one colorResin, fine detailFull color
8 cm (3.1 in)$22–28$101–106$123–235
12 cm (4.7 in)$28–34$101–157$257–548
18 cm (7.1 in)$34–50$168–313$649–1,231
25 cm (9.8 in)$45–78$336–649$1,287–2,797

Real quotes move with the shape. Three public designs, as objekto’s figurines page showed them on November 19, 2026: a runner in PETG from $40.90; a 12 cm budgie in PETG from about $63.90 for one copy and $9.95 each for 10; a 12 cm low-poly fox in resin from $152.90. Those examples are priced for delivery in France. Your firm price, for your country, is shown before you pay, and a delivered order started at $23.90 that day.

What moves the price:

  • Height. A figurine twice as tall holds about eight times as much material.
  • Material. At the same size, resin and full color cost several times what PETG costs.
  • Hollow or solid. A hollow figurine costs less than a solid one.
  • Quantity. An order holds 1 to 100 copies, and the price per copy goes down as the quantity goes up, as the budgie shows.
  • Where you live. objekto delivers to 35 countries: the European Union, Switzerland, Norway, Iceland, Liechtenstein, the United States, Canada, Australia and New Zealand. Outside the EU, import duties and taxes may be charged on delivery, and the recipient pays them.

Who owns the figurine, and can you sell it?

  • You created the character. The words and drawings you made are yours, and so is the choice to make objects from them. objekto’s FAQ follows that: you keep your pictures and any rights in the design generated for you, and you can sell the objects you designed (its answers on ownership and selling).
  • An illustrator drew it. The contract decides who owns the art, and a figurine is a new use of it. Read it, or ask, before you order a batch (how illustrators’ fees and rights usually work).
  • AI drew it. In the US, copyright doesn’t protect what an AI produced from your prompts (copyright guide), and objekto says the same of the 3D design: protection of AI-generated work isn’t guaranteed. You can make and sell the figurine; stopping someone who copies its look is less certain.
  • It is someone else’s character. A character from a film, a game or another author’s book is for your personal use only on objekto: never sold, never published in its gallery.

Is a 3D-printed figurine a toy?

Not by default, and for a children’s author this is the point to get right. objekto’s objects aren’t certified, and it doesn’t make toys for children under 3. Whether the law treats your figurine as a toy depends on who it is meant for, not on how it was made:

  • United States. A children’s product is “a consumer product designed or intended primarily for children 12 years of age or younger” (CPSC). It must pass third-party testing and have a written Children’s Product Certificate, and a product for children under 3 can’t have small parts that are a choking hazard (16 C.F.R. part 1501). To decide, the CPSC looks at what the maker says the product is for, at how it is packaged, displayed and advertised, and at whether consumers commonly see it as made for a child.
  • European Union. A toy is a product “designed or intended, whether or not exclusively, for use in play by children under 14 years of age” (Directive 2009/48/EC), and every toy sold in the EU must carry a CE marking. The directive’s Annex I leaves out products for collectors, decorative dolls among them, provided the product or its packaging says visibly and legibly that it is for collectors aged 14 and over. Regulation (EU) 2025/2509 replaces the directive from August 1, 2030 (European Commission).

So a figurine on your signing table, in your photos or on a shelf is a display piece. A figurine sold next to a picture book, for its young readers to play with, is likely to count as a children’s product, and a single print from a workshop comes with no test report and no certificate. To sell to children, talk to a testing lab first, or use a toy or plush manufacturer that certifies what it makes. This section repeats what the regulators publish; it isn’t legal advice.

What can an author do with a figurine?

  • A signing table. At a fair, a school visit or a bookshop, the character standing next to your author copies gives people a reason to stop. KDP charges its printing cost for those copies, before shipping (what publishing on KDP costs).
  • Pictures. The figurine next to the book, for your launch posts, your author page or a short video.
  • A keepsake. For the child the story was written for, on a shelf rather than in the toy box.
  • A small batch. Ten copies for early readers or a launch giveaway among adults: the price per copy falls with the quantity.
  • A drawing model. If you illustrate by hand, turn the figurine and draw the character from the angle the next page needs.

No character yet? In kdpbook, each main character gets a reference sheet, drawn from your description or from up to 3 photos or drawings, and that sheet is the reference for every picture the character appears in (AI picture book generator). If the story is already written, import it and have it illustrated.

Questions

Can you 3D print a figurine from a drawing?

Yes. An image-to-3D tool or service turns a clean, full-body drawing into a one-piece 3D model, and a 3D-printing workshop prints it. A drawing shows neither the size nor the back of the character, so give a height and describe what can’t be seen.

How much does a custom 3D-printed figurine cost?

On objekto, designing a one-piece figurine costs 1,900 credits, which a new account gets free once. The delivered print of a 12 cm figurine was estimated at $28–34 in PETG, $101–157 in resin and $257–548 in full color on November 19, 2026. Real quotes vary with the shape, the country and the number of copies.

Can I sell figurines of my own book character?

As far as the rights go, yes if you created the character; if an illustrator drew it, check your contract first. Selling it as a toy is a separate question: in the US, a product intended primarily for children 12 or younger needs third-party testing and a Children’s Product Certificate, and in the EU a toy needs a CE marking.

Is a 3D-printed figurine safe for a toddler?

Don’t give one to a child under 3. A one-off 3D print isn’t tested or certified as a toy, and thin parts can break off. objekto, the service this guide describes, doesn’t make toys for children under 3. Keep the figurine as a display piece.

How long does it take to get a 3D-printed figurine?

On objekto, designing a one-piece figurine takes about 7 minutes (the median on November 19, 2026), then manufacturing and delivery usually take 1 to 3 weeks, depending on the material and the country. The estimated delivery date is shown before you pay.

Make it with kdpbook

No character yet? Start with the picture book.

32-page illustrated story with read-aloud text. Trim size, margins, spine and cover follow KDP’s rules for you.

2,000 free credits · no card required